DWRT Dynojet's cutting edge engineering delivers the precise horsepower measurements a technician needs to make quick and accurate evaluations of engine and drive-train performance. This allows you to maximize your shop's potential with increased sales, service efficiency, and shop credibility. The dyno's durable, low-maintenance construction ensures that you will be investing in many years of flawless tuning and troubleshooting. By eliminating the need for engine removal, the vehicle mounting time is as little as 5 minutes. A technician can then perform a simple test and examine the results right in the ship. Utilizing the Dynojet WinPep software, the dyno operator can evaluate the entire drive-train condition for the purpose of routine servicing or all-out performance.

The 200ix dynamometer adds an extra drum and sliding carriage to accommodate ATV's, Trikes, Side-by-Sides, and Motorcycle.

Above Ground Standard Features and Equipment

Pit Model Standard Features and Equipment

**Certain international distributors may offer two year replacement parts warranties

Dynamometer Specifications Information

Below is a list of the Dynamometer specifications. In addition, you can download a pdf specs. document from below. For additional specifications related questions, please give us a call at: 800-992-3525.

Pre-Installation Guide
200i/250i Installation Guide EX+ Hardware
200iP/250iP Installation Guide (EX Hardware)
Maximum Horsepower / Torque
750 HP / 750 FT LBS
Maximum Speed
200 MPH / 322 KPH
Drum Diameter
18 IN / 45.72 CM;
Drum Width 
16.37 IN / 41.59 CM
Drums
2
Maximum Axle Weight
N/A
Standard Carriage Wheelbase Minimum
66 IN / 167 CM
Standard Carriage Wheelbase Maximum
84 IN / 213 CM
Extended Carriage Wheelbase Minimum
83 IN / 210 CM*
Extended Carriage Wheelbase Maximum
102 IN / 259 CM*
Air Requirements
100 PSI
Operating Temp Range
32 to 158 F / 0 to 70 C
Timing Accuracy
+/-1 Microsecond
Drum Speed Accuracy
+/-1/100th MPH
RPM Accuracy
+/-1/10th RPM
* Extended Carriage is Optional

Shop Requirements for Dynamometer

Forklift Requirements

CLOSE

Components Minimum Requirement Suggested
Operating System Windows 7 or later Windows 7 or later
Processor Dual Core Processor, 2GHz or faster Intel Core i5 2.8GHz or faster
Memory 4GB System Ram 8GB System Ram or more
Hard Drive 100GB or larger (54MB required for program) 500GB or larger (54MB required for program)
Monitor/Graphics Card 1280x1024 (SXGA) resolution or higher 1600x900 resolution or higher
Network Adapter 1 free 10/100Mbps RJ45 Ethernet port 1 free 100Mbps RJ45 or Wireless
External Media CD ROM drive CD ROM drive
Printer Printer, if prints are needed Color printer if prints are needed.

CLOSE

Dynamometer Options and Upgrades

Eddy Current
H-D Fuel Tap Dynojet’s H-D Fuel Tap is a system for fuel injected Harley-Davidson motorcycles designed to measure and synchronize fuel pressure readings with other data while conducting dyno tests. Utilizes a precision 0-100 psi pressure transducer and quick disconnects for fast, easy installation and accurate results. Stop tuning around a “problem area” and ensure the fuel system is performing as designed. *Requires Power Vision
Eddy Current
Eddy Current Load Absorption Unit Allows load testing by close-looping on rpm, speed or percentage of load. (Included on 250i/250ix series models).
Dynamometer pit covers
X Upgrade Allows dyno to additionally accommodate most other powersports platforms (ATV’s, Side-by-Sides, Go-Karts, and Trikes). Standard feature on “x” model powersports dynamometers.
Dynamometer pit covers
Extended Carriage Option Accommodates 102” wheelbase measured from rear axle to front tire.
Dynamometer pit covers
AFR-2 (Dual AFR Monitor) Measures real-time air/fuel ratios with integrated high-flow “pump” inside dyno (requires shop air).
Dynamometer pit covers
Power Vision Tuner Kit Dynojet now offers Power Vision Tuner Kits that include everything you need to start flash tuning Harley-Davidson® motorcycles using the online Power Vision Tune License system. These comprehensive kits are perfect for small independent shops, or franchised dealers looking to minimize the headaches and maximize profits. Use one Tuner Kit to tune as many bikes as you want with a single Power Vision and buy licenses as you need them!
Dynamometer pit covers
Stealth Extraction Interface Kit Includes professional grade Riv-Nut tool, drill bit, and enough hardware to sample up to 25 bikes! (Includes bolts, washers, Riv-Nuts, specialty bolts, and billet manifold interfaces.) Recommended to be used with Dynojet Gen4 Exhaust Gas Pump.
Dynamometer pit covers
Stealth Extraction Interface Kit (No Riv-Nut Tool) Includes drill bit, bolts, washers, Riv-Nuts, specialty bolts, and billet manifold interfaces.
Dynamometer pit covers
Torque Cell Module Measures real-time torque, and allows sweep, step and custom load simulation tests.
Dynamometer pit covers
Dual Cooling Fan System Integrated cooling fans with adjustable arms. 1,800 CFM each fan.
Dynamometer pit covers
Monitor Tray Bolts onto the control panel arm and holds the monitor, keyboard and mouse.
Folding Ramp
Primary Folding Ramp Gas strut assisted folding ramp bolts directly to the dynamometer.
Folding Ramp
Secondary Folding Ramp Supplemental ramp for “x” model dynos (both ramps required).
Dynamometer pit covers
Power Wheel Clamp Motor driven wheel clamp controlled through the control panel for securing front wheel without stepping off the motorcycle.
Dynamometer pit covers
Power Carriage Motor driven carriage controlled from control panel for adjusting wheelbase without stepping off the motorcycle.
Dynamometer pit covers
Air Brake Air actuated disk brake used for slowing drum. *not necessary with 250i series dynos*.
Dynamometer pit covers
Analog Channel Accessories Analog Channel Accessories Analog Sensor Cable Kit (Used for connecting customer supplied 0-5v sensors to DynoWare RT Main Control Module – includes 4 harness kits).
Optional Harnesses:
0-50psi Absolute Pressure Sensor
0-100psi Relative Pressure Sensor
Dynamometer pit covers
IR-Temp Sensor Kit Includes 1 0-500F sensor, magnetic base and mounting stand.
Dynamometer pit covers
HD Data Link Connect any Delphi equipped Harley-Davidson® (CAN & J1850) to DynoWare RT to read and sample live data direct from the bike! Whether you are making EFI calibrations, diagnosing a problem or simply getting a horsepower reading, the HD Data Link gives you more data such as volumetric efficiency, spark advance, cylinder temp, and more.
Dynamometer pit covers
O2 Sensor Kit Includes one wideband O2 sensor with harness for use with AFR-2 for dual air/fuel readings. Available in a 6ft or 12 ft harness length.
RPM Lead Kit
Inductive RPM Connection Kit This new harness kit aids dyno operators in establishing engine RPM signals with select motorcycles. Each harness uses OEM style connectors, plugs in-line with the stock ignition system, and the non-loomed wiring makes it easy for the Dynojet Inductive RPM to clamp onto. Works with several motorcycles: Denso coil ignitions, Ducati, KTM, Polaris, Can-Am, BMW, Aprilia and Harley Davidson.
Dynamometer pit covers
Dynojet Certified Custom Tuning Training The Power Commander and Power Vision tuning courses certifies Dynamometer owners as “Dynojet Approved Power Commander Tuning Centers” and/or "Certified Power Vision Tuning Centers." The certification course is a 3 day training course held at Dynojet Research Inc. in Las Vegas, Nevada. The course consists of hands-on dyno training as well as classroom time. Upon completion, "Dynojet Approved Power Commander Tuning Centers" and "Certified Power Vision Tuners" are listed online and are the only Dynojet approved tuning centers for customers seeking custom Power Commander or Power Vision tunes created on a Dynojet dynamometer.
Dynojet On-Board Diagnostic (OBD) Cables These cables allow the end user to plug into the On Board Diagnostic connector of the motorcycle to read and/or clear codes and view certain channels using a supplied OBD diagnostic tool. An over the counter OBD diagnostic tool is required. Make sure this tool is CAN compatible.
Part Number Description Fits
76950873 OBD Cable Kawasaki 2016 Kawasaki ZX-10R
76950872 OBD Cable Ducati 2015-16 Multistrada 1200 / 899 / 959 / 1199 / 1299
76950878 OBD Cable Yamaha 2016 Yamaha FJR1300, 2016 Yamaha XSR900
BDII Data Link Module
OBDII Data Link Module OBDII Data Link Module when used with the OBD Cables (sold separately), allow you to bring the ECU channels into WinPEP 8 and DynoWare RT software in real time. This is huge for dyno users, who can view this data live while using the dyno and sample it in the horsepower graph. Many channels are available but are case by case.
Dyno Testing Room
Fatboy Adapter Necessary for securing motorcycles with solid or heavily spoked front wheels *not needed with Power Wheel clamp*.
Dyno Testing Room
Industrial Noise Control Test Rooms Dynojet recommends Industrial Noise Control Test Rooms for enclosed dyno rooms. They offer various sizes and options, including exhaust extraction fans. Contact INC for more details.

Equipment Lease Options

Dynojet offers competitive and affordable lease-purchase options through programs that are provided by third party Equipment Leasing Partners. Over the years we have developed strong relationships with our vendors and trust in their abilities to provide prompt service, and ‘best in the business’ lease rates for our dyno customers. We have long term partnerships with lease vendors who can facilitate lease/finance programs for all types of buyers – whether you’re a new start-up performance shop or a multi-line dealership.

Our Leasing companies are quick to respond to your needs, and after receiving your basic one-page application, you can expect an offer put together for your lease within 24 hours, many times the same day! Most of our Leases are structured with a $1 buy-out (some states are restricted to a slightly different term) and this makes Leasing your dyno even more attractive.

Equipment Leasing offers several key advantages to a conventional bank loan or standard financing. Here are a few of the key advantages:

  • Tax advantages including easy to implement deductions, and leasing may help you to avoid the Alternative Minimum Tax. A larger deduction, would be more cash in your pocket! Thus reducing the true cost of leasing.
  • No down payment or low down payment. Leases can be structured with very little down, or nothing down, upon approved credit.
  • Some leases can be structured to fit your cash flow needs, such as Seasonal Payment packages, whereby your payments will be higher during your peak earning months (summer) and then lower in the Off-Season (winter).
  • Secure 100% financing, Plus ‘soft costs’ such as computers, installation, shipping, taxes, etc. Usually up to a 10% addition to the primary dyno cost.
  • Conserves capital and credit. This frees up your funds for any immediate needs that may arise such as payroll, or quick capital purchases that may arise.
  • Leasing can offer longer terms than a conventional loan, thus lowering your monthly payment. We currently offer as long as 72 months, in some cases.
  • Hedge against inflation. Your payment will remain the same, for the term of the lease, even if the buying power of the dollar fluctuates.
  • Quick and efficient, as there is very little paperwork for most deals under $50,000, and you will have an offer within 24 hours, most on the same day!

A final thought on leasing - We have done the shopping around for you and our Lease Partners offer the best rates in the leasing business, with a commitment to honesty and integrity.

Some of our customers have procured their own financing and leasing and we do welcome that, however we would caution you to investigate any company that may be offering you a deal that is simply ‘too good to be true’. We recommend a simple Better Business Bureau search, before you sign any documents or send any payments into a funding source that might be questionable.

Leasing or Buying Questions

For more information, contact our Dynamometer Sales Department US toll free: 1-800-992-3525. Locally: 702-399-1423. Optionally, you can send us a quick email using the following contact form: click here to access.

Dynamometer Sales Information

Please provide enough information regarding any sales/tech. inquiries so that our team can provide a detail response to your inquiry. Click on the following link to download our Equipment Lease Application.

   
 



Verify that you are a human not a robot, please choose: Cherry

Pear
Lemon
Apple
Cherry
Strawberry
Read Privacy Policy

NOTE: This form is for Dynamometer Sales and Technical Support inquiries ONLY! If you have a questions about our other Powersports products, use the following links.