H-D Fuel Tap
Dynojet’s H-D Fuel Tap is a system for fuel injected Harley-Davidson motorcycles designed to measure and synchronize fuel pressure readings with other data while conducting dyno tests. Utilizes a precision 0-100 psi pressure transducer and quick disconnects for fast, easy installation and accurate results. Stop tuning around a “problem area” and ensure the fuel system is performing as designed.
*Requires Power Vision
Eddy Current Load Absorption
Unit Allows load testing by close-looping on rpm, speed or percentage of load. (Included on 250i/250ix
X Upgrade Allows dyno to additionally accommodate most other powersports platforms (ATV’s, Side-by-Sides,
Go-Karts, and Trikes). Standard feature on “x” model powersports dynamometers.
Extended Carriage Option Accommodates 102” wheelbase measured from rear axle to front tire.
AFR-2 (Dual AFR Monitor) Measures real-time air/fuel ratios with integrated high-flow “pump” inside dyno (requires shop
Stealth Extraction Interface Kit Includes professional grade Riv-Nut tool, drill bit, and enough hardware to sample up to 25 bikes!
(Includes bolts, washers, Riv-Nuts, specialty bolts, and billet manifold interfaces.) Recommended
to be used with Dynojet Gen4 Exhaust Gas Pump.
Stealth Extraction Interface Kit
(No Riv-Nut Tool) Includes drill bit, bolts, washers, Riv-Nuts, specialty bolts, and billet manifold interfaces.
Torque Cell Module Measures real-time torque, and allows sweep, step and custom load simulation tests.
Dual Cooling Fan System Integrated cooling fans with adjustable arms. 1,800 CFM each fan.
Monitor Tray Bolts onto the control panel arm and holds the monitor, keyboard and mouse.
Primary Folding Ramp Gas strut assisted folding ramp bolts directly to the dynamometer.
Secondary Folding Ramp Supplemental ramp for “x” model dynos (both ramps required).
Power Wheel Clamp Motor driven wheel clamp controlled through the control panel for securing front wheel without
stepping off the motorcycle.
Power Carriage Motor driven carriage controlled from control panel for adjusting wheelbase without stepping off
Air Brake Air actuated disk brake used for slowing drum. *not necessary with 250i series dynos*.
Analog Channel Accessories
Analog Channel Accessories Analog Sensor Cable Kit (Used for connecting customer supplied 0-5v sensors to DynoWare RT Main Control Module – includes 4 harness kits).
0-50psi Absolute Pressure Sensor
0-100psi Relative Pressure Sensor
IR-Temp Sensor Kit Includes 1 0-500F sensor, magnetic base and mounting stand.
HD Data Link Connect any Delphi equipped Harley-Davidson® (CAN & J1850) to DynoWare RT to read and sample live data direct from the bike! Whether you are making EFI calibrations, diagnosing a problem or simply getting a horsepower reading, the HD Data Link gives you more data such as volumetric efficiency, spark advance, cylinder temp, and more.
O2 Sensor Kit Includes one wideband O2 sensor with harness for use with AFR-2 for dual air/fuel readings. Available in a 6ft or 12 ft harness length.
Remote Atmospheric Sensor (20ft) One atmospheric sensor for use with second atmos channel for reading conditions at
air box, intake, etc.
Inductive RPM Connection Kit This new harness kit aids dyno operators in establishing engine RPM signals with select motorcycles. Each harness uses OEM style connectors, plugs in-line with the stock ignition system, and the non-loomed wiring makes it easy for the Dynojet Inductive RPM to clamp onto. Works with several motorcycles: Denso coil ignitions, Ducati, KTM, Polaris, Can-Am, BMW, Aprilia and Harley Davidson.
Dynojet Certified Custom Tuning Training
The Power Commander and Power Vision tuning courses certifies Dynamometer owners as “Dynojet Approved Power Commander Tuning Centers” and/or "Certified Power Vision Tuning Centers."
The certification course is a 3 day training course held at Dynojet Research Inc. in Las Vegas, Nevada.
The course consists of hands-on dyno training as well as classroom time.
Upon completion, "Dynojet Approved Power Commander Tuning Centers" and "Certified Power Vision Tuners" are listed online and are the only Dynojet approved tuning centers for customers seeking custom Power Commander or Power Vision tunes created on a Dynojet dynamometer.
Fatboy Adapter Necessary for securing motorcycles with solid or heavily spoked front wheels
*not needed with Power Wheel clamp*.